Mine Winder
Communication (MWC)

Mine winders are important items of infrastructure in underground mining and there are many installations operating within the industry.

  • MORE DETAILS
  • Gas Drainage
    Plant (GDP)

    Tecom Australia has been working in the Gas extraction industry for over 20 years. Assisting in the development of longwall goaf drainage

  • MORE DETAILS
  • Conveyance
    Overspeed (COS)

    The SIL2 Rated (Safety Integrity Level) COS, has been designed to allow onboard braking to occur should an over-speed condition ever occur.

  • MORE DETAILS
  • Conveyance
    Overspeed (COS)

    This system is designed as a Primary Safety Circuit Conveyance Overspeed device should an overspeed condition be experienced.

  • MORE DETAILS
  • Maintenance
    Systems & Equipment

    Focusing on keeping your systems and equipment serviceable by ensuring all statutory and preventative maintenance is adhered to

  • MORE DETAILS
  • SERVICES AND SKILLS

    INNOVATIVE TECHNOLOGY ORIENTED & KNOWLEDGE-BASED SERVICE

    Card image cap

    CONSULTING

    Tecom has over 26 years of providing Control System Design; Safety focused Consulting services & Safety Audits for the Mining and Materials Handling sector. TECOM can provide your business with the very best in SIL rated Control System Design using our in-house specialist consultants and engineer. We can offer your business a full survey and design solution for any control system and data telemetry requirements.

    Card image cap

    ENGINEERING

    TECOM is now able to offer in house Electrical and Mechanical Engineering Services for the design of you Materials Handling, Conveyor Systems, Conveyance Communications, Winder Control System, Headframe, Shaft Hoisting System, Manriding Cages, Shaft Sinking Winder Controls, Mobile And Portable Winching Systems. All while leveraging off the experience of being a Member of the Siemag Tecberg Group of companies

    Card image cap

    SUPPLY CHAIN MANAGMENT

    At Tecom we understand the importance of ensuring the end to end supply chain f products materials and services we supply The Transportation and warehousing is only one of a small part in the process of getting resources, materials, parts, components and finished goods to the right place at the right time to keep the supply chain operating efficiently. Therefore we focus on the whole picture.

    Card image cap

    TECHNICAL SERVICES

    Tecom’s ability to provide you with the service and products your business deserves is only surpassed by the strength of its Technical service personnel. At Tecom, by making our employees feel rewarded and valued. It has enabled our company to grow the skills and abilities of our whole service sector Thereby, making us an industry leader that you can rely upon when maintenance or service is required

    TOPICS AND TECHNOLOGY

    NEWS,FACTS AND EVENTS FOR CUSTOMERS AND EMPLOYEES

    Card image cap

    Cerberus: Underground Guardian – Overland Champion

    Overland Conveyors TECOM AUSTRALIA SIL RATED

    Picture 1 of 4

    Cerberus Data telemetry for safety of overland infrastructure.

    FRONT LINE DEFENCE – MINE SITES

    CERBERUS SIL RATED DATA COMMUNICATIONS – with VIDEO & VOICE options

    NATIONAL

    JUST as Cerberus guarded the gates of the underworld in Greek mythology, Tecom Australia’s Cerberus conveyance communications management system guards underground personnel from many of the hazards, they face on a daily basis.

    Tecom Australia specialises in hazard reduction technologies and was the first Australian company to develop Safety Integrity Level (SIL) rated communications for drift and shaft winders and now overland conveyors — not only permitting the instant management of incidents but also adding multiple safeguard layers and incorporating video to monitor down the shaft, inside cages, man-riding conveyances, length of conveyors and the operation of winders.

    Cerberus is a closed-loop system that adds additional layers of redundancies, which are themselves SIL-rated. An example of this is a simple switched door lock on a typical personnel cage. If the single switch fails, the door may not close fully, creating potential injury to workers. By adding an additional switch in series to that circuit, the odds of both switches failing at the same time are increased exponentially. In order to override such a system, other systems within that closed-loop must first be activated – such as turning a key, pushing a button or pulling a lever. It is these added levels of redundancy that prevent remote override and significantly reduce the risk of injury.

    Cerberus also delivers Communications over VOIP with its own dedicated, intelligent 5.8GHz data radio network connecting underground operations to the surface. Apart from monitoring and interfacing the closed-loop SIL redundancies across the site to the mine’s PLC system, Cerberus incorporates data, telemetry, and video communications that meet NSW mine safety guidelines – one of the strictest in the country.

    In the case of a conveyance cage, the system monitors the cage emergency stop, the pushbuttons, the safety switches (monitoring door open and closed positions), the cage door lock, a motion prestart alarm and a slack rope switch. Gone are the days of three-bell systems with inherent time delays that can turn a slack rope event in a cage into a deadly situation. With Cerberus’s VOIP and video communications, the winder control system and the operator are instantly alerted to any abnormal event. They can not only manually and automatically stop the cable from feeding but also look inside the cage and communicate directly with personnel to quickly and safely rectify the situation.

    The live video link also allows the winder control operator to look above, below and inside the cage

    or bucket as it is travelling, in real-time. This enables fast hazard identification, assessment

    and avoidance. This is only one example of Cerberus’s seemingly endless list of applications – it can be applied to almost any materials handling role.

    The system that system is adapted to be used in conjunction with long conveyors, particularly those spanning tens of kilometres. In this case, Cerberus can be used to link a system of pole-mounted video and comms stations spaced at regular intervals (approximately 1km apart) along the length of the conveyor.

    REMOTE CONTROL SAFETY SYSTEM - Data Telemetry and Communication
    Overland CONVEYORS – remote data telemetry

    This independent, wireless network can also include solar power for backup. E-Stop buttons are positioned at regular intervals along the conveyor so that when a repair crew needs to work on a section of the belt (which may be 40km away from the conveyor control), they are able to radio in their position, press the E-Stop at the closest point to the repair and work without fear of the conveyor being accidentally started, causing injury or death.

    Again, by employing SIL redundancies, only the ground crew can re-start the conveyor after completing a sequence of steps to reset the system. The belt cannot be in put into action by staff in the control tower. To view a video detailing the functions and operation of the Cerberus system operating on an underground cage and winder system, visit the following link:  https://youtu.be/ux6ZNz3BJIk

    Tecom Australia is an expert in designing bespoke systems to suit any client’s requirements.

    It is able to assess potential site hazards and develop integrated solutions that mesh with a

    company’s existing PLC. Tecom adds the safety stop protocols to any materials handling soluti

     

    Improving Mining Safety

    Hazard Reduction Technologies

    The team at TECOM will analyse your specific requirements and develop a system or program that delivers reliable, cost effective, trouble free operations.

    Tecom Australia offers survey, design and implementation of sophisticated radio systems and custom products to private organisations throughout the global mining sector.

    Custom Automation Control Ancillaries

    • System Design and Installation
    • Integration/Interface with Third Party Products
    • On-site Survey and Facilities Assessment
    • Preventative Maintenance
    • Breakdown Service

    Copyright 2019 TECOM AUSTRALIA All Rights Reserved